Special-Shaped LED Mesh Project
A scenic decoration project used a custom P31.25 round LED mesh screen with an approximate diameter of 11.8 m and an approximate display area of 108 sqm. The circular form required a traceable section layout, installation reference and visual-effect planning rather than a standard rectangular screen plan.
Project Overview
This public case documents a real P31.25 round LED mesh screen used in a scenic decoration setting. It separates verified project facts from the engineering values that must be recalculated for a new site.
| Customer type | Scenic decoration or themed landscape project buyer |
|---|---|
| Product actually used | P31.25 LED mesh screen |
| Application | Round scenic decoration and programmable visual display |
| Project form | Approx. 11.8 m diameter circular structure |
| Display area | Approx. 108 sqm |
| Market | China; exact project location withheld |
| Public customer name | Not published |
Project Evidence
The three visuals below belong to the round P31.25 case route. Separate P25 and flying-screen references from the source file are deliberately excluded.
Challenge and Solution
The visible outline is circular, but production, addressing, wiring and installation still need an orderly system that can be checked at the factory and followed on site.
Technical Review
The pitch, dimensions and area below are facts from this reference. Controller, power, section count and installation details must be recalculated from the new project's approved geometry and BOM.
| Actual pitch in this case | P31.25 LED mesh screen used |
|---|---|
| Public dimensions | Approx. 11.8 m diameter and approx. 108 sqm display area |
| Shape planning | Circular outline translated into traceable sections and a logical pixel matrix |
| Data direction | Sequential addressing and module order reviewed against the approved layout |
| Content direction | Scenic visual effects reviewed with viewing distance and target clarity |
| Power and control | Project-specific calculation required from actual pixels, section arrangement, cable route and current BOM |
| Installation boundary | Final structure, load review, fixing, local electrical work and site compliance require the buyer's appointed professionals unless separately agreed |
Production and Quality Control
The value of a special-shaped screen is not only the final outline. Every section must remain identifiable from production and testing through packing and site assembly.
Review diameter, edge profile, support positions and approved drawing revision.
Assign traceable section and module references for the circular layout.
Check data direction, connection order and cable route against the map.
Inspect pixels, effect continuity and transitions across adjacent sections.
Match packing labels, section IDs and installation references.
Pack sections so the project side can identify the intended assembly order.
Final Result
The completed reference demonstrates that LED mesh can support a large circular scenic feature when the product plan, logical matrix, section identification and installation route are coordinated as one project.
RFQ Checklist
A marked front elevation or approved shape drawing is more useful than a general area alone. It gives the factory enough context to discuss feasibility and the next technical step.
Buyer FAQ
The answers distinguish this case's verified facts from specifications that require a new project review.
The original case file identifies this 11.8 m round project as a P31.25 LED mesh screen. P25 materials in the same source document belong to other examples and are not presented as part of this case.
Yes, when the outline, dimensions, support structure, viewing conditions and installation method are clear enough to review section geometry and the logical pixel route.
A smaller pitch may support more visual detail or closer viewing, but the final choice depends on content, geometry, viewing distance, project area and budget. It is not selected from shape alone.
Provide a front elevation or marked outline with dimensions, support positions, fixing direction and any open or cropped areas. Site photos and side views are also useful.
The project plan should connect section IDs, module order, data direction, packing labels and installation references so each part remains traceable from testing through site assembly.
Scope must be confirmed per project. Jiayi can support factory-side product and technical coordination, while final structural engineering, load review, fixing, local electrical work, installation and compliance normally require appointed local professionals.
Send the target outline, dimensions, structure information, viewing distance, content direction, environment, local voltage and project schedule. Jiayi Lights can review the product route and identify the technical inputs needed for the next discussion.
Note: Your email information will be kept strictly confidential.
